New Simmons Carbide

The finest wear rods and... we can prove it!


Simmons Latest and Greatest carbide design

The wear on the newer design 6" carbides still looks significantly heavier on the front of the host bar compared to the rear.

New design 6"

outside bar above, inside bar below

 

Enlarged view of inside bar
Note the significant loss of steel. The plastic near the wear rod would have shown a similar wear pattern, as the Extreme ski photo shows.


 

To whom it may concern,

The enclosed 6” carbides from Simmons have been used less than 1,500 miles on northern Wisconsin trails. As you can see, the front edge of the runner has worn down significantly, thereby exposing the leading carbide wear pad. As a result of the exposed carbide wear pad, the carbide caught on a railroad crossing and bent the trailing arm resulting in a $240 repair bill. The back half of the carbides are still in good shape but the loss of material at the front of the rod has rendered these carbides useless and actually dangerous.

Darren N.
Orion, IL

 


Used-new design 4"

Home  Main Prove It Page  |  Site Map

Bergstrom Skegs

Contact Us

Copyright © 1999-2016 Bergstrom Skegs, Inc.
All rights reserved.