Eversharp

The finest wear rods and... we can prove it!

Eversharp

evrtest.jpg (8405 bytes)

Nice concept, but the steel would have to wear at the same rate as the carbide to work.  Since the steel will wear faster, the 3/64" (less than 1/16" thick) carbide will become exposed to the point when it will break due to the lack of side support.

Used Eversharp Carbide

Note how the carbide has broken away at the same rate the steel has worn

Eversharp 1999 Advertisement Drawings

ev991a.gif (8571 bytes) ev991b.gif (9771 bytes)
Comparison Drawings
ev992a.gif (8213 bytes) ev992b.gif (8675 bytes)

Gray portion of carbide indicates material Eversharp says wore off. 

Eversharp advertisement

The results (shown above) are impossible. Keep in mind that all high grade impact resistant carbide wears at the same rate under the same conditions.

The style of host bar can affect the durability of the carbide by sharing some of the load, however Eversharp's style does not.

Bergstrom Skegs 6" carbide: 3/16" square - .0482 grams weight Eversharp 6" carbide: 3/64" (less than 1/16") wide x 17/64" tall - .0164 grams weight

This is a 2.94 : 1 (Bergstrom : Eversharp) ratio in weight
Carbide alone is a 2.94 : 1 wear ratio

 

Dollar per mile, Bergstrom Skegs are the best value on the market...Period!


Home  |  Main Prove It Page   |  Bare Pavement Tests  |  Site Map

 

Bergstrom Skegs

Contact Us

Copyright © 1999-2016 Bergstrom Skegs, Inc.
All rights reserved.